基于CFD高精度算法的雷电电磁场研究

雷电空间电磁场一直是电磁领域研究的热门，成熟的算法例如有限时域差分法（FDTD），传输线矩阵法（TLM）以及频域的矩量法（MoM）在计算雷电问题方面都有广泛的应用。由于计算流体力学（CFD）中的Euler方程与电磁学中的Maxwell方程有着相同的守恒形式，而且采用间断伽辽金方法（DG）已经在流场问题上得到广泛的尝试，因此引入了基于计算流体力学的DG方法来离散时域Maxwell方程，并采用网格分区并行技术加速计算，使用基于DG的圆球雷达散射截面积（RCS）算例进行测试，数值结果一致表明DG算法在求解电磁场问题上的可行性，之后通过计算一段近场雷电通道的电场分布并与解析解、某算法仿真解对比，数据基本吻合，说明该方法适合于雷电电磁场的计算。     

低轨卫星缺失时序数据的模式识别方法

在航天应用中，低轨卫星经常会由于原始数据缺失而影响卫星时序数据模式识别结果，降低准确率。针对该问题提出了一种新型MR-GRU模型，可有效处理缺失时序数据，并获得较好的模式识别准确率。区别于传统模型的补全缺失数据的方法，MR-GRU模型直接在缺失时序数据上运用循环神经网络进行训练，对传统门控循环单元结构进行了改进，增加了两个新变量：掩蔽项和衰减项。掩蔽项作用于输入，衰减项作用于输入和隐层单元输出。MR-GRU模型不仅能够保持时序数据固有的时间特性，还能有效提高模式识别精度。在卫星时序数据上的模式识别试验表明，MR-GRU模型准确率优于传统模型。     

Maximal admissible mode decision delay in terminal guidance

Mode decision-maker is a critical component in the logic-based Integrated Estimation and Guidance(IEG) system. For the best possible estimation and guidance performance, the mode decision delay of the mode decision-maker should be limited to a range as small as possible. This paper presents a numerical method for computing the maximal admissible mode decision delay that varies with time-to-go. Particular attention has been paid to highly maneuvering target interception in terminal guidance. The results of this research offer useful guidelines for the design of the mode decision-maker in IEG systems.     

Establishment of atmospheric weighted mean temperature model in the polar regions

Due to the special geographical location and extreme climate environment, the polar regions (Antarctic and Arctic) have an important impact on global climate change. Atmospheric weighted mean temperature (Tm) is a crucial parameter in the retrieval of precipitable water vapor (PWV) from the zenith wet delay (ZWD) of ground-based Global Navigation Satellite System (GNSS) signal propagation. In this paper, the correlation between weighted mean temperature and surface temperature (Ts) is studied firstly. It is shown that the correlation coefficients between Tm and Ts are 0.93 in the Antarctic and 0.94 in the Arctic. The linear regression Tm model and quadratic function Tm model of the Antarctic and the Arctic are established respectively using the radiosonde profiles of 12 stations in the Antarctic and 58 stations in the Arctic from 2008 to 2015. The accuracies of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model which is a state-of-the-art global Tm model are verified using the radiosonde profiles from 2016 to 2018 in the Antarctic and Arctic. Root Mean Square (RMS) errors of the linear regression Tm model, the quadratic function Tm model and GPT2w Tm model in the Antarctic are 3.07 K, 2.87 K and 4.32 K respectively, and those in the Arctic are 3.53 K, 3.38 K and 4.82 K, which indicates that the quadratic function Tm model has a higher accuracy compared to linear regression Tm model, and the accuracies of the two regional Tm models are better than that of GPT2w Tm model in the polar regions. In order to better evaluate the accuracy of Tm in the PWV retrieval, the PWV values of radiosondes are used for comparisons as the reference value. The RMS errors of PWV derived from the two Tm models are similar for 1.28 mm in the Antarctic and 1 mm in the Arctic respectively. In addition, the spatial and temporal variation characteristics of Tm are analyzed in the polar regions by spectral analysis of Tm data using fast Fourier transform. The results show that the Tm has obvious seasonality and annual periodicity in the polar regions, and the maximum difference between warm season and cold season is about 63 K. After comparing and analyzing the influences of latitude, longitude and elevation on the Tm in the polar regions, it is found that latitude and elevation have a greater influence on the Tm than the longitude. As the latitude and elevation increase, the Tm decreases, and vice versa in the polar regions.     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

Analysis and design of Cubesat constellation for the Mediterranean south costal monitoring against illegal immigration

Costal monitoring is focused on fast response to illegal immigration and illegal ship traffic. Especially, the illegal ship traffic has been present in media since April 2015, as the number of reported deaths of immigrants crossing the Mediterranean significantly increased. Satellite images provide a possibility to at least partially control both types of events. This paper defines the principal criteria to select the best satellite constellation architecture for maritime and coastal monitoring, filling the gaps of imagery techniques in term of real-time control. The primary purpose of a constellation is to obtain global measurement improving the temporal resolution. The small size and low-cost are the main factors, which make CubeSats ideal for use in constellations. We propose a constellation of 9 Cubesats distributed evenly in 3 different planes. This reduces the revisit time enhancing the coverage duration. In addition, it also allows observing fire, damage on building and similar disasters. In this analysis, the performance criteria were reported such as the revisit time, the vision duration and the area coverage.     

主辅拦截器协同制导方法研究

随着现代导弹技术的发展,导弹的突防能力越来越强,对导弹的防御难度也逐渐增大。为增强拦截器的杀伤力并降低成本,可利用主辅拦截器协同制导对目标进行拦截。建立了拦截器与目标的相对运动模型,通过对运动方程进行线性化分析,发现协同制导问题实质为具有终端时间限制条件的导引问题,该问题可转化为线性化系统的最优控制问题。利用最优控制中的极小值原理设计了时间协同制导律。仿真结果表明:该制导律可实现多枚拦截器在同一时刻拦截目标的协同制导要求。     

基于飞行资源分离的航班延误传播研究

在航班串设计及机组排班过程中,经常涉及飞行资源(飞机、机组)分离的问题。而延误航班的飞行资源分离将导致共享资源的衔接航班发生延误,并传播至后续航班串。本文考虑带有飞行资源分离的航班串,利用基于贝叶斯网络的比例风险回归模型,对资源分离后的航班离港延误进行分析。对比两种不同时刻飞机与机组资源分离方案下,各延误因素对衔接航班离港延误,以及整个后续航班串延误时间的影响,结果表明,不同时刻分离方案会造成不同的延误传播效果。本文为飞机、机组资源分离时刻的选择提供了定量分析方法,结果表明,资源分离时刻的不同对衔接航班的离港延误,以及整个后续航班串延误波及时间的影响都不同。     

飞机动态推出控制策略仿真优化模型

机场离港运行的无序化造成滑行过程中的长时间排队等待及大量燃油浪费。为了减少燃油消耗和废气排放,在已有的动态推出控制策略基础上提出了阶梯函数控制策略(Step function,SPC)和非线性函数动态推出策略(Nonlinear function,NPC)的一般形式,以离港成本为目标,建立了基于停机位等待惩罚的动态推出控制模型,在不延误的前提下提出了一种基于网格参数优化的蒙特卡洛仿真优化算法。通过北京首都机场实际运行数据对推出过程进行仿真计算,并与无控制策略以及传统N-control策略的最优可达解进行仿真对比,结果表明:在不延误的前提下,提出的推出策略可以更加有效地降低平均滑行道滑行时间,NPC策略的离港运行成本和燃油成本可降低45.52%和54.23%,SPC虽然成本节省劣于NPC策略,但是其简单的操作方式可以为离港推出调度方式的改进提供决策支持。     

航天器近距离交会的固定时间终端滑模控制

针对航天器近距离交会段的位置姿态耦合控制问题，假设航天器受外界干扰且目标航天器存在空间自由翻滚情形时，基于固定时间概念设计了一种六自由度位姿终端滑模自适应控制器，通过引入显含正弦函数的切换项来避免奇异问题。此外所设计的控制器含双幂次项，不仅能全局提高姿态和位置的跟踪速度及精度，还能估计系统稳定所需的时间上界，且该上界与状态初始值无关。基于Lyapunov方法分析了闭环系统的固定时间稳定性。仿真结果表明，该控制器能快速实现对航天器近距离交会时相对位置和姿态的控制，具有较高的精度和良好的干扰抑制能力。